Introduction to Israel SII Certification
The abbreviation of SII Israel Standards Association, the full name is: The standards lnstitution of lsrael. All electronic and electrical products exported to Israel must obtain SII certification. Because Israel is also a member of IEECEE-CB, they recognize and can accept its IECEE-CB members. CB test report issued by the country.
SII認證的必要性
以色列強制性認證中的“強制”需從多方面來理解，就以色列國家頌布的法令來看，所有的貨物在進入以色列時必須由SII機構執行相應的貨物檢查，以確認貨物符合以色列的國家標準要求。以色列“工業貿易勞工署”將此種認證程序叫做“presumption of conformity”，貨物以批次進行檢查，即每次輸入的貨物都要進行檢查，上次檢查所發出的測試證書可以用于下次貨物檢驗時使用，但不能直接去代替此次的貨檢，只會縮短在貨物在海關的停留時間，以便為客戶節省部分的海關停滯費用（通常SII貨檢時間為40天左右）。
Applicable product range
Household appliances
Switches and automatic switching devices for cables, wires, instruments
Plants and joints
Lighting Technology Products
Adjust protection equipment
Low-voltage control device
Small power transformer
Welding equipment
Personal computers and laptops
Chemical supply
Small and medium engines
Measuring tools
Electronic equipment
Game console
Information technology equipment and office equipment
Cinematographic equipment and supplies
Radio communication, radio broadcasting, television equipment
Communication and fax equipment
Low-voltage equipment, high-voltage equipment
Electric heating equipment
Application process
1.Application
2.Sampling test
3. Submit a test report
4. Factory counselling before factory inspection
5.Site review
6.Certificate
Application materials
Manufacturers of electrical products, if they want to obtain approval for the marking of an electrical appliance produced by their factory, must submit a formal application including at least the following:
A. A brief description of the organizational structure of the manufacturing plant (wood map of the organizational structure);
B. Explanation of specifications and standards on which the product is manufactured;
C. Description of production equipment;
D. Description of inspection equipment;
E. If necessary, measurement calibration procedures and equipment description;
F. Explanation of quality control measures adopted to monitor consistent manufacturing and its quality control specifications;
G. If the products are not all manufactured in the applicant's factory, the manufacturing stage in the manufacturer's factory and by other manufacturers should be separately explained;
H. A list of test items that can be performed in the applicant's laboratory and a list of equipment available for these tests.
Certificate information
NTEK Group
Third party certification body
Hot Line
400-800-6106
Official account
Submit successfully